Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Montclair, CA | Pinecrest Contractors
CGI cabinetry and countertop work in Montclair usually comes down to one question: do the existing boxes still have life in them, or is it time to pull everything and start square? We’re Pinecrest Contractors, and we provide independent CGI cabinet installation, refacing, and countertop templating across the 91763 and CGI service in Ontario. The difference here is that we fit CGI lines into Montclair’s post-war stucco bungalows and narrow lots, where nothing is plumb and the original plumbing has usually been dripping behind the sink base for thirty years. Call (855) 702-1622 for a free estimate.
We’re not a manufacturer-authorized CGI dealer. We’re a full-scope general contractor that works with CGI sales & service products because the boxes are well-built and the door fronts hold up better than most in dry heat. Our credibility comes from field-fitting CGI cabinetry inside 1950s and 1960s Montclair kitchens where walls run out of square and slabs have settled. Gil Rourke, our owner, learned construction at Palomar College and spent years working residential and light commercial builds across the Temecula Valley before starting Pinecrest. He still keeps a worn framing square from his framing days hanging in the truck cab. That’s the kind of detail that matters when you’re templating a quartz top against a wall that’s out by five-eighths of an inch.
Key Takeaways
- We install, reface, and repair CGI cabinet boxes and fronts in Montclair’s 1950s – 1970s housing stock.
- We’re independent – not manufacturer-affiliated – so we recommend based on what your existing framing and plumbing will actually support.
- OEM-compatible hinges, glides, and door fronts matched to your existing CGI line, with all-plywood replacement boxes where water damage has compromised the carcass.
- Free estimates with a written, line-item scope. Call (855) 702-1622.
Why Montclair Residents Choose Us for CGI Service
Most cabinet shops in the CGI service in Pomona Valley want to sell you a full replacement, because that’s what their margin is built on. We don’t work that way. When a Montclair homeowner calls us about peeling thermofoil or sagging drawer bases, the first thing we do is pull the toe kicks and look at what’s actually happening underneath. If the box is sound, we reface it. If the sink base has been soaking up a slow galvanized-pipe drip for two decades, we’ll tell you straight: that carcass is done, and replacing just the doors is throwing money away.
We’re local to the Inland Empire and we understand what these houses are. Montclair’s tract homes were built fast, on modest lots, with materials that were fine for 1962 but show their age now. The cabinet boxes are often in better shape than people expect, but the hinges have been re-drilled three times and the corner braces are pulling. We re-block stripped hinge walls, re-anchor drawer glides, and match OEM or exact-replacement CGI hardware rather than forcing in whatever’s on the shelf at the box store.
The right material in the right place – that’s where the job starts.
Styles & brands we work with
Common CGI Construction Problems We Solve in Montclair
- Thermofoil and laminate door skins peeling along the bottom rail. In Montclair kitchens with original galvanized supply lines, slow sweating and small drips run for years behind the sink and dishwasher. The bottom rails of CGI thermofoil fronts absorb that moisture and the skin blisters and peels. We replace the affected fronts and, where the leak persists, flag the plumbing before it ruins the new work.
- Particleboard or MDF box bottoms swelling at the sink base. The dry Pomona Valley air hides the problem until you grab a door and the whole box flexes. By the time a homeowner notices, the bottom has usually crumbled. We splice in all-plywood replacement boxes when the surrounding run is sound.
- Hinges and drawer glides pulling out of stripped screw holes. Original CGI-era boxes in these 1950s – 70s kitchens have been re-drilled repeatedly by previous owners. The cabinet walls lose their bite. We re-block behind the hinge plates with solid wood and re-anchor the glides, which is a fraction of the cost of new boxes.
- Countertop seams failing at the sink cutout and inside corners. The galley layouts in Montclair’s small stucco bungalows put every inch of countertop run under load. Laminate seams open at the sink, and even solid surface tops fail at inside corners where the original cabinets have settled. We template new quartz or granite to the actual wall run, not to a blueprint number.
- Out-of-square walls making prefab cabinet runs impossible without scribing. Half the kitchens we open in Montclair are out of square by a half-inch or more. Semi-custom CGI box-and-front packages still need field fitting. We scribe fillers, shim bases, and set the countertops so the finished run looks intentional, not like it fought the house.
CGI Service in Montclair: What Local Conditions Mean for Your Equipment
Here’s what shapes almost every CGI cabinet and countertop decision in Montclair: the city was essentially fully platted out during the post-war boom, so nearly all construction work here is remodel, addition, ADU, and re-roof or re-pipe, not new ground-up builds. The lots in the 91763 and nearby CGI in Chino are narrow and were platted in the 1950s for single-story tract homes with detached garages. That means an addition or garage conversion hits setback and lot-coverage limits quickly, often before the cabinet layout is even drawn. We’ve seen projects stall at the city counter because the homeowner ordered cabinets before the addition clearance was resolved. The permitting process here is geared to renovation, not subdivision, so the practical sequence is: lot-coverage check first, then cabinet order. We coordinate that with the city, because one contractor managing the whole scope is what keeps a Montclair kitchen from turning into a six-month holding pattern.
That’s the difference between a cabinet installer and a general contractor. We’re looking at what’s behind and above the cabinets while we’re quoting the cabinets.
CGI Models & Products We Service in Montclair
We work with the CGI lines that actually show up in Montclair kitchens: the Ready-to-Assemble all-plywood cabinet boxes with dovetail drawers, the Euro-style full-overlay door and drawer fronts in thermofoil and painted MDF, and the quartz and granite slabs CGI sells through dealer and contractor channels. For fast turnaround, we keep common OEM-compatible hinges, glides, and drawer guides on hand, and we can pull exact-replacement fronts for most current CGI catalog lines inside a week. When a box is sound, we match parts. When it’s not, we splice new all-plywood carcasses into the run and hang the existing fronts if they’re still good.
We’ll show you the options, honestly. Refacing against replacement, Silestone against Caesarstone, painted MDF against thermofoil. Then we build what you choose, to the brand’s spec.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Montclair
What you’ll pay depends on whether we’re refacing, replacing boxes, or doing a full kitchen. Here’s where the ranges fall for Montclair work in the current market:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The condition of the existing boxes is the biggest variable. Refacing a run with sound carcasses costs far less than replacing cabinets that have been soaking up a slow leak for years. Our free estimate includes a written line-item scope, so you know exactly what’s being done and what it costs before we start. Call (855) 702-1622 to set one up – the estimate is free and there’s no obligation.
Serving Montclair, CA — Our Local Coverage Area
We’re based in the Montclair area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Montclair
It depends on what the sink base and the walls behind the hinges look like. If the boxes are dry, square enough, and the hinge walls haven’t been stripped out, refacing with new CGI door and drawer fronts is the right call. If the bottoms have swollen or the carcass flexes when you pull a drawer, replacement boxes are the honest answer. We inspect before we quote, and we’ll show you what we found. Call (855) 702-1622 to schedule that inspection.
Often it doesn’t, and that’s worth knowing before you order cabinets. The 91763 lot stock was platted tight in the post-war boom, so additions and garage conversions run into setback and lot-coverage limits fast. We check the city’s permit path and the lot coverage early in the process, before a single door front is ordered. Call (855) 702-1622 and we’ll walk the property and give you a straight read.
Usually yes, if the boxes are sound and we’ve re-leveled the base runs. Quartz needs a stable, well-supported deck, so we’ll check the corner braces and the sink base framing before templating. If the boxes are compromised, we’ll tell you that before you spend on new stone. A free estimate covers the inspection and the honest recommendation.
Moisture. In Montclair homes with original galvanized supply lines, slow sweating and tiny drips run for years behind the sink and dishwasher. The bottom rails of thermofoil fronts soak it up, and the skin blisters and peels. Replacing the fronts fixes the symptom, but we’ll also check the plumbing so the new fronts don’t fail the same way. Call (855) 702-1622 and we’ll take a look.
Yes, if the remodel touches exterior or load-bearing walls. The CGI service in Upland and Pomona Valley has real seismic exposure, and additions and ADUs need proper shear-wall and anchor-bolt detailing, not cosmetic-only work. As a full-scope general contractor, we handle that as part of the job, coordinated with the permit and inspection process. That’s one reason to have a contractor who does the framing and the cabinets under the same contract.
Service Areas Near Montclair
We serve Montclair and the surrounding Pomona Valley and Inland Empire communities. If you’re in Montclair service area neighborhoods or just outside the 91763, we’re a short drive away. We also take on projects in CGI service in Running Springs up in the mountains, and down toward CGI service in Huntington Beach for coastal kitchen work.
Book Your CGI Service in Montclair Today
If you’re ready to see whether your CGI cabinets are worth saving, or you want a straight quote on a full kitchen remodel in Montclair, call us at (855) 702-1622. The estimate is free. We’ll show up, open the toe kicks, and tell you what’s actually there.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Montclair and the Inland Empire.