Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Murrieta Homeowners Choose CGI Construction
Most Murrieta homeowners searching for “CGI construction” are really looking for one thing: a contractor who knows CGI cabinetry and storage systems well enough to fix, reface, or install them correctly the first time. Pinecrest Contractors provides Murrieta CGI service including independent cabinet installation, refacing, and countertop coordination across the city, from Alta Murrieta to the newer tracts east of the 215. We are not authorized, sponsored, or endorsed by CGI, and that’s worth saying plainly because it lets us quote honest scope regardless of whose boxes we’re installing. Call (855) 702-1622 for a free estimate on your CGI project.
Why Trust Pinecrest Contractors for Your CGI Construction?
CGI cabinets show up in a lot of Murrieta kitchens, especially in homes built or remodeled during the 1990s and early 2000s. Our crews have torn into enough of them to know which door styles, finishes, and hinge patterns hold up in this specific climate, and which ones fail in the inland heat. When we see a west-facing bank of CGI thermofoil doors that’s starting to peel, we don’t guess. We know exactly what caused it: years of afternoon sun driving surface temperatures past what the laminate skin was designed to handle. That’s the kind of detail that comes from hands-on work, not a spec sheet.
Gil Rourke, our owner, grew up off Murrieta Hot Springs Road and spent years working every phase of residential construction across the Temecula Valley before building Pinecrest Contractors into a full-scope general contracting outfit offering CGI repair in Murrieta Hot Springs and surrounding areas. We approach CGI work the same way we approach everything: diagnose the actual problem, fix what’s fixable, and tell you straight when replacement makes more sense than repair. “The right material in the right place – that’s where the job starts.” That applies to a $12 hinge and a $4,000 cabinet run equally.
Styles & brands we work with
Common CGI Construction Problems We Fix in Murrieta
- Thermofoil and laminate door skins delaminating or peeling. South and west-facing CGI cabinet faces take brutal afternoon sun in Murrieta, especially during the 100-degree stretches from June through September. The thermofoil layer expands and contracts at a different rate than the MDF core underneath, and eventually the adhesive lets go. We see it most on CGI slab and Euro-style doors where the full face is one continuous skin. Fixing it means replacing the affected doors, not trying to glue the skin back down, because the adhesive has already failed across the entire panel.
- RTA and assembled cabinet boxes racked out of square. CGI ready-to-assemble cabinets are perfectly square in the box, but only if the installer shims and blocks them correctly. When the boxes are screwed to walls that aren’t flat, or when backer blocking is skipped, the carcass twists. Doors rub at the corners, drawers stick mid-travel, and soft-close catches stop catching. We can re-square and re-block most of these boxes without tearing them out, which saves Murrieta homeowners thousands over a full cabinet replacement.
- Particleboard and MDF box edges swelling from water exposure. A slow leak under the sink, a dishwasher that dumps steam, or a nearby shower that vents into the kitchen: any of these can swell the exposed edges of CGI particleboard boxes. The hinge screws lose their grip, the carcass softens, and doors start sagging. If the swelling is contained to one end panel, we can often repair and seal it. If it’s spread through the box, replacement is the only honest recommendation.
- Soft-close hinges and drawer glides sagging or snapping. Wide pantry pull-outs carry a lot of weight, and CGI’s standard hardware, like most mid-tier lines, has a rated capacity. Load those pull-outs with canned goods and cast iron, and the glides bend or the mounting screws strip out. We match original CGI hinge and glide patterns where the box is sound, and we swap in quality aftermarket soft-close hardware when the OEM part has been discontinued or isn’t worth the markup.
- Mismatched or missing hardware on partially updated kitchens. Murrieta homeowners often update a kitchen in phases, and that leaves CGI cabinets with a mix of original and replacement hinges that have slightly different overlays. Doors hang just off enough to catch. We standardize the hardware across the run so every door and drawer sits flush and closes the same way.
CGI Parts & Our Repair-vs-Replace Approach
CGI uses industry-standard hardware patterns for most of their assembled and RTA lines, which means we can usually match hinges, glides, and catches without waiting on a special order. Where the original part is still available and priced reasonably, we use it. Where it’s been discontinued or the markup doesn’t make sense, we spec a quality aftermarket soft-close replacement and tell you exactly why. The honest line is this: if a CGI cabinet has swollen MDF or delaminated skins across multiple doors, refacing or targeted replacement beats chasing repairs. Chasing repairs on a box that’s already failing just means paying twice.
We stock a working inventory of common CGI-compatible hinges, glides, and mounting plates locally, which lets us turn most Wildomar CGI service and Murrieta repair jobs around quickly. For finish-matched replacement doors and drawer fronts, lead times run longer, which we’ll tell you before you commit. For an exact quote on your specific job, call (855) 702-1622.
Our CGI Service Process – Step by Step
- 1
Diagnosis on site. We inspect every CGI box, door, drawer, hinge, and glide before quoting. That means checking for racked carcasses with a square, testing soft-close function, and looking for the first signs of thermofoil separation or edge swelling. No guesswork, no blanket quotes.
- 2
Repair or install to manufacturer spec. Whether we’re re-squaring RTA boxes, replacing delaminated doors, or installing a full CGI cabinet run, everything gets shimmed, blocked, and leveled properly. We spend extra time on the backer blocking because that’s the difference between a kitchen that stays square for 15 years and one that starts racking in 18 months.
- 3
Top and finish coordination. When quartz or granite goes over CGI cabinets, the top fabrication and the cabinet install have to line up. We coordinate both under one contract, so the template, sink cutout, overhang, and backsplash all match the cabinet layout without finger-pointing between subs.
- 4
Testing and walk-through. We cycle every drawer and door before we leave, adjust what needs adjusting, and walk you through the finished work. If a hinge catches or a glide sticks, we see it and fix it on the spot.
- 5
Workmanship warranty. Our install work is warrantied. CGI’s manufacturer warranty applies to the product; our warranty covers the labor and the install. We explain the difference before we start, so there’s no confusion later.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Murrieta
We work with the full range of CGI cabinetry and storage lines found in Murrieta homes: Euro-style flat-panel slab doors and drawer fronts, shaker and raised-panel door profiles, Ready-to-Assemble and assembled cabinet lines, and CGI wood-look and laminate closet and storage systems. We install new CGI cabinets, reface existing CGI boxes with matching doors and drawer fronts, re-square and re-block installed RTA runs, and replace failed hinges, glides, and panels. Most commonly, we’re rebuilding kitchens where the original CGI install was done fast and cheap, and the hardware and boxes show it. We also coordinate quartz and granite tops over CGI cabinets and finish the job with the backsplash, so the whole kitchen comes together under one contract.
We Also Service These Brands
CGI is a cabinet line, and most Murrieta kitchens involve more than one brand. Pinecrest Contractors works across KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures, which means we can manage a full kitchen or bathroom project without handing you a list of vendors to chase. Single-contractor accountability from the cabinets up.
FAQs – CGI Construction Service in Murrieta
Yes. If the boxes are square and the carcasses are dry and structurally sound, we can reface your CGI cabinets with new doors and drawer fronts in the finish and style you choose, and replace the hardware in the same pass. Refacing typically costs less than a full replacement and keeps the existing layout intact. If the boxes have water damage or racking beyond repair, we’ll tell you that straight. Call (855) 702-1622 and we’ll assess your specific kitchen.
That’s thermofoil delamination. The west and south-facing cabinet faces in Murrieta get hit with direct afternoon sun and sustained heat, and the thermofoil skin expands and contracts faster than the MDF core it’s glued to. Once the bond starts failing, it spreads across the whole door face. There’s no durable repair for this; the doors need to be replaced with a finish that handles the heat better. We can match the cabinet layout and replace only the affected doors, which saves you from paying for a full kitchen redo.
Usually not. RTA cabinets go out of square when the original installer skipped shimming or backer blocking, and the box twisted as the screws were driven. We can pull the cabinet, re-square it with leveling shims, add proper backer blocking, and reset the doors and drawers to operate cleanly. Most of the CGI boxes we see in Murrieta just need to be installed correctly the second time. If a box is too far gone, we’ll say so, but the majority are fixable.
Yes. Whether you have CGI cabinets or another line, we handle the full template, fabrication, and install process for quartz and granite tops. If your cabinet boxes are out of level or out of square, countertop installation is the time to correct that, because a heavy stone top locks in whatever condition the boxes are in. We check and fix the cabinets before the template is cut. CGI repair in Temecula and Murrieta countertop installation over CGI cabinets typically runs $2,000 to $6,500 depending on slab and layout. Call (855) 702-1622 for a site-specific quote.
We handle the whole package. Cabinet install or refacing, countertop fabrication and set, backsplash tile, and plumbing fixture work all fall under one Pinecrest Contractors contract. That means one schedule, one point of contact, and no warranty gaps between a cabinet guy, a tile guy, and a countertop fabricator. Backsplash work in Murrieta typically runs $800 to $2,500 depending on tile and square footage.
Project cost depends on scope. Cabinet installation or refacing-adjacent work on a Murrieta kitchen typically runs $4,000 to $13,000; a small kitchen remodel involving CGI cabinets, tops, and backsplash usually falls between $9,000 and $20,000. Here are the line-item ranges we quote most often:
| Service | Typical Murrieta Range |
|---|---|
| Cabinet Installation (CGI box install, refacing-adjacent work) | $4,000 – $13,000 |
| Countertop Installation (quartz or granite over CGI cabinets) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
For an exact quote on your kitchen, call (855) 702-1622 and schedule a free estimate.
Book Your CGI Service in Murrieta, CA
Whether you’re refacing peeling CGI doors, re-squaring a racked RTA cabinet run, or planning a full kitchen rebuild with new tops and backsplash, we’ll walk the site, give you a straight read, and quote the work. Call (855) 702-1622 today to schedule your free estimate in Murrieta.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Murrieta since our first cabinet job on a vintage tract home near Alta Murrieta.