Unilock Construction in Perris, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Unilock Construction in Perris, CA | Pinecrest Contractors

We provide independent Unilock installation and repair across Perris, from paver driveways in the 92571 subdivisions to patios on the 92570 flats. What makes our Unilock work different here is simple: we’ve spent years setting pavers on Perris’s former dairy ground and watching how Santa Ana winds treat a finished surface. Pinecrest Contractors is not a Unilock dealer and we’re not manufacturer-affiliated. We’re a Perris General Contractor that installs and services Unilock hardscapes the way their engineering specs require, then stands behind the work. Call Gil Rourke and our team at (855) 702-1622 for a free estimate on any Unilock project in Perris.

Construction workers performing home renovation and framing on a building site in Perris, CA

Call (855) 702-1622

Why Perris Residents Choose Us for Unilock Service

Most hardscape crews in Riverside County can lay pavers. Fewer can tell you why a Brussels Block driveway is blooming white after a wet winter, or whether that settlement crack in your Estate Wall is a soil problem or an installation problem. We can, because we’ve been on the screed end of Unilock installations across Perris for years. Gil Rourke grew up off Murrieta Hot Springs Road and has spent his whole career working residential and light commercial builds in this valley. His older brother was a framer, which is how Gil got pulled into the trade at seventeen, and he still keeps a worn framing square from those days hanging in his truck cab. That’s the person who runs your project, not a rotating cast of subcontractors.

We stock Unilock OEM pavers, wall units, and recommended polymeric joint sands in our local yard, which means a Perris repair doesn’t have to wait on a freight shipment from the Midwest. For full Unilock sales & service, we’re the crew Perris homeowners call when the first contractor didn’t get the base right.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Unilock Construction Problems We Solve in Perris

  • Efflorescence blooms on Brussels Block and Cambridge pavers. Perris is dry most of the year, but when monsoon-season rain finally hits, it soaks into paver joints and wicks salts to the surface. The white fuzz isn’t a product defect; it’s mineral salts from the soil and joint sand. We clean it properly and re-sand with Unilock’s recommended polymeric product so it doesn’t return the next rainy season.
  • Base failure and rutting in driveways set over native Perris soils. This is the big one in 92571. Much of the east side was dairy and agricultural land, and that old ground still settles years after grading. If pavers were set without geotextile fabric or proper compaction, the base shifts and the surface ruts. We fix this by excavating to competent soil, installing geotextile, and rebuilding the base before resetting pavers.
  • Joint sand loss and paver migration along wind-exposed edges. Santa Ana events don’t just knock over trash cans. They scour fine joint sand out of paver seams and can lift unsecured border units. We install proper edge restraints and use polymeric sand that firms up after curing, which holds the field together through multiple wind seasons.
  • Color fade and surface scaling on older Beacon Hill installations. Perris summers routinely push past 100°F, and that heat plus UV exposure oxidizes the top layer of unsealed pavers unevenly. We can assess whether a repair or selective replacement is the right call, then match Unilock’s current color runs as closely as the manufacturing process allows.
  • Heaved wall courses in Estate Wall and other segmental retaining walls. Expansive clay soils in the Perris valley absorb winter moisture and push against wall structures. A wall that’s cracking at the base usually means drainage or base-course work, not just resetting the top few units. We rebuild the affected section so the wall stays put.

Unilock Service in Perris: What Local Conditions Mean for Your Equipment

Here’s the thing about Perris that changes how Unilock paver work is done here, and it’s not something you’ll find on a generic hardscape page. The east-side subdivisions south of Ramona Expressway, especially in 92571, are being built on former dairy and agricultural ground. When we excavate for paver base on those lots, we regularly pull out abandoned irrigation lines, old manure-laden soil pockets, and buried dairy infrastructure the original grading contractor never removed. You can’t just scrape and compact over that. We excavate down to competent soil, haul out the organic material, bring in engineered fill, and compact in lifts before the first layer of base rock goes down. That’s a Perris-specific ground condition. Go ten miles west to the established neighborhoods around Menifee, and the soil profile is completely different. In Perris, the base is the job, and the pavers are just what sits on top of it.

On a new-build corner lot in the 92571 growth area, our crew pulled out an abandoned dairy irrigation line and a pocket of manure-laden soil that the grading contractor had missed, then re-compacted with engineered fill before setting a Unilock Brussels Block driveway and Beacon Hill walkway. We used OEM joint sand and edge restraints, and the finished drive has stayed tight through two Santa Ana wind seasons with no paver lift or sand loss. That’s the difference between knowing Perris and knowing pavers.

Unilock Models & Products We Service in Perris

We install and repair the full Unilock range, including Brussels Block, Beacon Hill, Cambridge pavers, and Estate Wall systems. For repairs, we use Unilock’s own OEM pavers, wall units, and recommended polymeric joint sands so color and dimension match the existing field. Aftermarket sealers and edge restraints are only used when they meet or exceed Unilock’s spec. We keep common Unilock units and joint sands staged in our local yard for faster turnaround on Perris jobs, which matters when you’ve got a failing driveway edge and a Santa Ana forecast on the horizon.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Unilock Service Pricing in Perris

What you’ll pay depends on how much base work the site needs, not just the square footage of pavers. Perris lots with former agricultural soils usually need more excavation and engineered fill than established subdivisions, which pushes a project toward the upper end of the range. Here’s what Unilock work typically runs in this market:

Service Price Range
Paver Driveway Installation $7,000 – $18,000
Paver Patio Installation $3,500 – $11,000
Driveway Replacement $5,000 – $14,000

Every estimate is free and comes as a written line-item quote. You’ll see exactly what’s going into the base, what’s going onto the surface, and where your money lands. Call (855) 702-1622 to get yours started.

Construction workers performing home renovation and framing on a building site in Perris, CA

Serving Perris, CA — Our Local Coverage Area

We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Unilock Construction in Perris

Service Areas Near Perris

We handle Unilock installation and repair throughout the Perris Valley and surrounding communities. You’ll find our crews working in Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village. If you’re just outside Perris proper, we likely already cover your street. We also provide Unilock service in Nuevo and Unilock service in Mead Valley for neighbors on the valley’s east and north edges. For the full Perris coverage map, see our Perris service area page.

Book Your Unilock Service in Perris Today

If your Unilock driveway, patio, or wall needs work, or you’re planning new hardscape on a Perris lot, call us at (855) 702-1622. We’ll inspect the site, give you an honest read on what the base needs, and quote the job in writing. Free estimates, no pressure, no sales pitch.

Written by Gil Rourke, Owner at Pinecrest Contractors, serving Perris and the Temecula Valley for over two decades.

Need Construction help in Perris? Licensed & insured · Written quotes before work starts response · free estimates
Call (855) 702-1622
Areas We Serve

Request a Free Estimate in Perris

Tell us what you need — Pinecrest Contractors responds fast. No obligation.

When you send us your details, you accept our Privacy Policy and authorize us to contact you through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch