Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Upland, CA | Pinecrest Contractors
We install, repair, and replace Tremron paver hardscapes across Upland, CA‘s three ZIP codes: 91784, 91785, and 91786. What separates our Tremron work in Upland from a generic paver job is that we’ve spent years building here on two very different ground conditions: the soft, uncompacted citrus-orchard soil of the historic core and the hard, fire-hardened hillside lots north of Foothill Boulevard. That local soil and fire-zoning reality changes how deep we cut, what we spec under the pavers, and which Tremron product belongs where. Call (855) 702-1622 for a free, on-site Tremron estimate.

Why Upland Residents Choose Us for Tremron Service
We’re Tremron sales & service people first, meaning we know these product lines down to their aggregate blends and how they behave after a few inland summers. Gil Rourke, our owner, grew up off Murrieta Hot Springs Road and learned early that the ground under your feet dictates the project more than the product catalog ever will. He brings that same read to every Upland driveway, walkway, and patio we build. Our crews have installed Manchester wall block on sloped foothill lots where retaining height and drainage both matter, and we’ve repaired Mega Olde Towne driveways in the 91786 ZIP that other contractors simply sanded over and called done. One contractor, every system: we handle the base, the drainage, the pavers, the edge restraint, and the finish sand under one coordinated crew, not a chain of subs.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Upland
- Efflorescence on Mega Olde Towne pavers: White mineral bloom after winter rains, made worse in Upland by high-mineral soil and irrigation runoff that wicks salt into the paver surface. We clean it correctly and address the water path, not just the stain.
- Color fade and surface chalking on Bergerac pavers: Unshaded foothill yards in 91784 get intense UV, and Bergerac’s mid-tone pigments chalk faster there than on coastal jobs. We can restore and seal, or replace with a more UV-stable line if the fade is past saving.
- Edge spalling and joint sand loss on Catalina slabs: Santa Ana winds drive grit across flat-slab surfaces, and heat cycling cracks thin slab edges. We re-set edges and use polymer-stabilized joint sand that holds up to dry wind better than standard sand.
- Base settlement and paver heave in historic-core yards: Old citrus orchard soil in much of Upland’s 91785 and 91786 areas was never compacted to modern standards. Pavers sink, rock, and shift within a few years. We over-excavate, install geotextile separation, and compact in lifts.
- Driveway ruts and creeping pavers on slopes: North-of-Foothill lots often pitch several feet from garage to street. Without a proper edge restraint and base drain, the whole field migrates downhill. We build restrained, drained systems that stay put.
Tremron Service in Upland: What Local Conditions Mean for Your Equipment
Upland is an old citrus-belt city at the literal foot of the San Gabriel Mountains, so construction here is split between preserving pre-1930s Craftsman and ranch homes in the historic core and the mile-close wildland-urban-interface fire-exposure edge north of Foothill Blvd. The historic core sits on ground that spent decades as citrus orchard: disked, fumigated, and never compacted to support modern hardscape. That means a Tremron paver base in the 91786 ZIP routinely needs deeper excavation, geotextile separation, and stronger aggregate than a newer Rancho Cucamonga Tremron service would need for a tract yard. A nearly identical project two blocks south of Foothill may hit nothing but old alluvial fill, but two blocks north you’re in the State-defined very-high fire hazard severity zone, where even a simple patio cover or re-roof can trigger WUI ignition-resistant construction requirements. If you’re building a Tremron patio within sight of the foothill ridgeline, the fire code may dictate non-combustible surfacing and specific jointing around the hardscape edge. That’s not a sales pitch; it’s what the city will ask for at plan check.
Tremron Models & Products We Service in Upland
We work with the full Tremron residential catalog we see on Upland projects: Mega Olde Towne pavers for driveways and high-traffic runs, Bergerac for patios where color and texture carry the design, Catalina slab pavers for modern, flat-panel looks, and Manchester wall block for short retaining walls and planter edges. We use Tremron OEM color-matched joint sand and polymeric sand for warranty-compliant installs. For base aggregate and edge restraints, we spec quality aftermarket materials that outperform Tremron’s standard kits in Upland’s clay soils. Most common models and color blends are stock items with our local suppliers, so we can usually schedule Upland repairs within a week rather than waiting on a factory lead time. We also keep Tremron in Ontario stocked for nearby jobs.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Upland
Pricing below reflects what we see across Upland’s three ZIP codes. Foothill lots with slope and WUI restrictions run toward the upper end; flat historic-core lots run leaner unless we’re fighting old orchard fill.
| Service | Typical Upland Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Every estimate includes a line-item breakdown: excavation depth, base aggregate type, geotextile where required, paver line and pattern, edge restraint, and joint sand specification. No change orders once we break ground unless we find something structural nobody could have known about. Call (855) 702-1622 to schedule your free, no-obligation estimate.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well, and we offer Pomona Tremron service as well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Upland
Concrete pavers themselves are non-combustible, which satisfies the ignition-resistant surface requirement for hardscape. What triggers additional review is the surrounding construction: overhead patio covers, attached structures, and landscape within the zero-to-five-foot zone. Trenches and bases for paver patios may also need non-combustible fill and weed barriers that meet local fire ordinance. We’ve built on foothill lots enough to know which Upland projects sail through plan check and which need a WUI review. Call (855) 702-1622 and we’ll walk your specific lot through the requirements.
In much of the historic core and parts of 91786, we’re cutting through decades of citrus-orchard fill: loose, disturbed soil that was disked and fumigated but never compacted. Standard six-inch base prep isn’t enough there. We typically over-excavate to ten inches or more, lay geotextile separation fabric, and compact aggregate in lifts. That’s the difference between a paver job that’s still flat in ten years and one that’s rocking in three.
Lighter, earth-tone colors in the Mega Olde Towne line hold up best under inland UV. The deeper, richer Bergerac pigments look stunning at install but chalk and fade faster on open, unshaded foothill exposures. If your patio or driveway gets full afternoon sun, we’ll steer you toward the line and color that won’t look washed out in five years.
Sometimes, but it depends on the line and age. If the original is a current or recently discontinued product, we can often source matching stock or blend from a nearby supplier. If it’s a long-discontinued paver, we’ll be honest: a perfect match is unlikely, and the better move is often a full overlay or selective replacement with a coordinating line. We’ll show you both options before you spend a dollar. Call (855) 702-1622 with a photo and we’ll give you a straight read.
Because Upland’s soil and irrigation water are both mineral-heavy. Efflorescence is soluble salt wicking up through the paver and crystallizing on the surface. If we just strip the white bloom and walk away, it returns with the next rain cycle. The fix is cleaning with the right acid-free product, then addressing the water path: better drainage under the base, proper sub-surface moisture management, and sometimes a breathable sealer. We’ll tell you which approach fits your lot because the right material in the right place, that’s where the job starts.
Service Areas Near Upland
We run Tremron installs and repairs across the eastern San Gabriel Valley and western Inland Empire. That includes Tremron service in Garnet just across the border, Tremron service in Montclair to the west, plus the areas around Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village. Same crews, same spec standards, same Tremron product knowledge.
Book Your Tremron Service in Upland Today
If you’re planning a Tremron driveway, patio, or wall block project in Upland, or you’ve got paver problems that need a proper diagnosis, call Pinecrest Contractors at (855) 702-1622. We’ll come out, read your soil, check the fire zone, and give you a written, line-by-line estimate before you commit.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Upland since the early days of the company.