Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Costa Mesa, CA | Pinecrest Contractors
We provide independent Mr-Glass shower and tub-door retrofits, repairs, and full bathroom conversions across Costa Mesa’s 92626, 92627, and 92628 ZIP codes, and we also handle Mr-Glass service in Fountain Valley. What makes our Mr-Glass work different here is that we treat every glass replacement as a framing and waterproofing job first, because Costa Mesa’s coastal salt air and 1950s-era Eastside walls punish glass hardware harder than almost anywhere else in Orange County. If your Mr-Glass door is sticking, rusting, leaking, or pulling loose from the wall, call (855) 702-1622 and we’ll tell you straight whether it’s a repair or a replacement.
Pinecrest Contractors is an independent general contractor, not authorized or endorsed by Mr-Glass. That matters. We’re not tied to one product line, so when a Mr-Glass part has failed because of corrosion, bad original blocking, or a worn seal, we fix the root cause rather than swapping in the same weak point twice. Gil Rourke, our owner, learned early that the right material in the right place is where the job starts, and nowhere does that hold truer than in a coastal bathroom where glass meets salt air and old stud walls. Explore our full Mr-Glass sales & service expertise to see how we approach these doors.
Why Costa Mesa Residents Choose Us for Mr-Glass Service
Most glass companies in Costa Mesa will swap a track, a roller, or a hinge and call the job done. We won’t, because we’ve seen what happens six months later when the wall behind that hinge was never blocked to carry the glass load. We’ve handled Mr-Glass tub-door retrofits across Costa Mesa’s small Eastside bathrooms long enough to know which failure is the hardware, which is the framing, and which is the salt. The answer changes the quote, and we’d rather quote the right thing the first time.
We’re local to the Costa Mesa service area, and we run our own crews under one contract, so you’re not coordinating a glass vendor, a tile setter, and a framer. Whether it’s a sem-frameless hinged door pulling out of a 1950s stud bay or a sliding bypass panel jumping its lower track, we repair, reframe, re-tile, and reset the glass as one job. Our goal on every call is a door that operates cleanly, seals tightly, and doesn’t rust out for years.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Costa Mesa
- Corroded lower guide rails and pivot pins from salt air. Homes in 92627 sit close enough to the marine layer that brass and zinc hardware on Mr-Glass doors tarnishes, pits, and seizes. The door doesn’t swing smoothly, and rust bleeds onto the tile. We replace with marine-grade stainless pivots and hinges where the door series allows, and reset the panel so it isn’t dragging through corrosion.
- Hinges pulling loose from old plywood-over-stud walls. Eastside tract houses from the 1950s and 60s often have nothing solid behind the tile where a heavy glass panel hangs. When the hinge screws strip out, the panel sags and chips against the curb. We open the wall, sister in new blocking, patch, re-tile, and re-hang the door. The fix starts behind the tile, not on top of it.
- Roller and track wear making sliding bypass doors jump the rail. Once rollers wear flat and the track gets scored by grit, the door panel tilts, binds, and eventually pops off the lower rail. That gap lets water spray into the wall framing. We replace rollers and tracks matched to the Mr-Glass series, and check that the header is level, which on older Costa Mesa floors it often isn’t.
- Hardened, shrunken vinyl sweeps leaking across the curb. Dry-season heat and UV through a bathroom window bake the bottom seals. They shrink, crack, and channel water straight over the curb onto the bath mat. We stock sweeps and drip rails for the Mr-Glass bypass and hinged lines, and we’ll set the panel height so the new sweep actually compresses against the curb.
- Leaking neo-angle and pivot enclosures in small tub-to-shower conversions. When a tub comes out and a shower pan goes in on a tight Eastside footprint, the old Mr-Glass enclosure rarely survives the move. We reframe the opening, build a curb that drains, and install a new enclosure sized to the actual finished opening, not the original plan.
Every one of these shows up differently in Costa Mesa than it would five miles inland. Salt air comes first. Framing comes second. The glass itself is rarely the root cause.
Mr-Glass Service in Costa Mesa: What Local Conditions Mean for Your Equipment
Costa Mesa sits nearly fully built out, and the construction trade here is dominated by remodel, second-story addition, and ADU work, not new subdivisions. In practice that means your Mr-Glass shower door is probably living in a bathroom framed when Eisenhower was president, and it’s being asked to behave like it’s new. On the Eastside’s 1950s-60s small-lot ranches, swapping a tub for a walk-in shower usually means re-framing and blocking a wall that was never built to carry a glass panel. Costa Mesa runs its own building department, and when that wall work is part of a permitted tub-to-shower conversion, inspectors want the structural fix documented before they sign off. We also work as a General Contractor in Costa Mesa. We plan for that. The door you get is one that’ll hold in a wall that now has something to hold it. It’s the difference between a shower that stays dry and one that leaks into the next room’s baseboard in a year.
Mr-Glass Models & Products We Service in Costa Mesa
We work across the Mr-Glass product lines most common in Costa Mesa bathrooms: the Semiframeless Hinged Shower Door, the Frameless Pivot and Neo-Angle Shower Enclosure, the Sliding Bypass Tub & Shower Door, and the Bi-Fold Tub Shower Door. For each, we spec OEM-style hinges, pivots, rollers, and seals matched to the door series, so geometry and screw-hole alignment stay correct. We’ll go aftermarket only where a quality equivalent outlasts a discontinued factory part, and we’ll tell you when that’s the case. We keep a working stock of common Mr-Glass sweeps, rollers, and pivot sets for fast turnarounds across Costa Mesa, so a worn bypass door on an Eastside rental unit doesn’t sit leaking for three weeks while parts ship.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Costa Mesa
The cost of Mr-Glass repair or replacement in Costa Mesa depends mostly on two things: whether the framing behind the tile needs structural work, and whether you’re keeping the tub or converting to a walk-in shower. Parts and labor are the predictable part. Here are the line-item ranges we quote from, and these hold steady whether the job is in 92626, 92627, or 92628.
| Service | Typical Costa Mesa Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Tub-to-shower jobs on Eastside 1950s plans trend toward the upper end, because those walls need reframing and blocking before the glass goes up. A free estimate includes opening the wall only if we already know we’re quoting framing, not as a fishing trip. Call (855) 702-1622 and we’ll put a written number on it.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well, and we also provide Mr-Glass repair in Huntington Beach. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Costa Mesa
Yes, we will. On a tight Westside lot, the clearance and structural plans matter more than the glass itself. The new framing goes in to whatever load spec Costa Mesa’s building department requires for the glass panel weight, then the enclosure is installed to that finished opening. We’ve done several on 1950s and 60s lots that were never designed for an upper-level bathroom, and design around deflection and header depth from the start. Call (855) 702-1622 for an exact quote, the estimate is free.
No. Pinecrest Contractors is an independent general contractor. We repair, retrofit, replace, and install Mr-Glass shower doors and enclosures, but we are not authorized, endorsed, or warrantied by the manufacturer. What we offer is installation and repair work that stands on our own record, plus honest material choices when a part should be OEM and when a quality aftermarket equivalent makes more sense.
We default to OEM-style hinges, pivots, rollers, and seals that match the original door series. That keeps screw-hole alignment and panel geometry correct. When a factory part has been discontinued, or when a stainless aftermarket equivalent genuinely outlasts the original zinc part in Costa Mesa salt air, we’ll offer the better option and explain why. We don’t pad the bill with cheap knockoff tracks.
Most Mr-Glass tub-to-shower conversions in Costa Mesa run three to six working days, depending on whether the wall needs reframing, the curb needs rebuilding, and whether the city permit and inspection cycle is in play. We also serve Mr-Glass in San Joaquin Hills. Framing behind the tile is the variable. On an Eastside ranch where the wall was never blocked for glass, we’ll add the extra day and do it right rather than hang a panel on a wall that’ll flex. Call (855) 702-1622 for a schedule estimate.
A straightforward shower replacement with Mr-Glass glass in Costa Mesa typically runs $3,000 to $8,500. A full tub-to-shower conversion runs $3,500 to $10,000, and if the Eastside framing behind the tile needs sistering and blocking, it’ll land in the upper half of that range. Permit fees, if required, are separate and itemized. Call (855) 702-1622 for a written line-item quote, free of charge.
Service Areas Near Costa Mesa
Besides our full Costa Mesa coverage across 92626, 92627, and 92628, we run Mr-Glass repair and shower conversion crews into neighboring cities and down through the Temecula Valley. See our Costa Mesa service area details or check Mr-Glass service in Newport Beach for work in and around the Newport coast. We also cover Mr-Glass service in Yorba Linda and the surrounding inland communities.
Book Your Mr-Glass Service in Costa Mesa Today
If your Mr-Glass door is sticking, rusting, or leaking in Costa Mesa, call (855) 702-1622 today. We’ll come out, diagnose the real problem, and put a written estimate in your hand before any work starts. Same-day visits are available for active leaks and doors that won’t seal.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Costa Mesa since he first learned to frame a wall straight.