Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Bloomington, CA | Pinecrest Contractors
We provide independent Mr-Glass shower enclosure service across Bloomington, and the one thing that separates our work here is that we actually understand how this unincorporated county pocket ages a glass enclosure differently than Fontana or Rialto. Gil Rourke runs our team, and we’ve spent enough time inside Bloomington’s post-WWII tract homes off Valley Boulevard to know which Mr-Glass hinges fail first in Inland Empire heat and which seals the county inspector is going to ask about before sign-off. Call (855) 702-1622 for a free estimate on any Mr-Glass shower in Bloomington.
Why Bloomington Residents Choose Us for Mr-Glass Service
Most contractors in Bloomington treat a shower enclosure as an afterthought, something to slap on after the tile guy leaves. We don’t, because we’ve rebuilt enough Mr-Glass frameless and semi-frameless systems to know how they actually age here. The silicone and sweep seals dry out and pull away under Bloomington’s UV and thermal cycling, letting water weep onto the curb and rot whatever framing sits behind the tile. A sagging semi-frameless door drags its curb, and a year later you’re pulling studs. Gil grew up off Murrieta Hot Springs Road and learned construction at Palomar College’s construction technology program before spending years running residential builds across the Temecula Valley, so he carries that same unhurried, measure-twice approach into every Bloomington shower we touch. We fit OEM Mr-Glass hinges, handles, sweeps, and seals when the panel geometry is intact, and we spec heavier aftermarket stainless hardware when the original parts are the real weak point. Independent contractor, not Mr-Glass authorized, not Mr-Glass affiliated, and we’ll tell you straight when re-tempering beats replacement.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Bloomington
- Dried-out silicone and sweep seals. Bloomington’s summer heat and thermal cycling bake the factory sealant on Mr-Glass enclosures until it shrinks back from the glass. Water then weeps at the curb line and starts chewing the framing behind the tile. We see this on nearly every older Valley Boulevard home we open up.
- Seized or sagging roller and hinge hardware. Builder-grade sliding door rollers on older Mr-Glass semi-frameless units collect grit and hard-water scale, then seize so the panel drags instead of glides. The door no longer closes flush against the jamb, and the gap lets splash-out puddle on the bathroom floor.
- Etched and spotted glass. Bloomington sits in a hard-water zone, and the mineral content in the local supply leaves a film that etches tempered glass over a few seasons. Spring monsoon-style downpours don’t help, they work grit into the bottom channel where it grinds against the glass edge.
- Racked enclosures in converted or added bathrooms. Informal garage conversions and added rooms along the Valley Boulevard corridor often have shower openings that are just out of square. A pre-cut Mr-Glass enclosure forced into that opening racks under stress, and the first thing to go is usually a chip at the hinge hole.
- Soft studs behind a leaking curb. This is the expensive one. When a Mr-Glass door has been leaking for years, the damage is rarely just the glass. We regularly find rotted framing behind the tile and a curb that needs full reconstruction before any new enclosure goes in.
Mr-Glass Service in Bloomington: What Local Conditions Mean for Your Equipment
Bloomington is unincorporated San Bernardino County, so any shower or glass-enclosure work tied to a remodel runs through San Bernardino County Land Use Services, not a city building department. That changes the job. County plan check is noticeably tighter than what contractors working in Mr-Glass service in Glen Avon or nearby cities deal with, particularly when the bathroom itself was a prior unpermitted addition or garage conversion, which is common along the older stretches of Valley Boulevard. If your Mr-Glass enclosure is being replaced as part of a bathroom remodel, the county will want documentation that the existing bath was made legal before they sign off on the new work. We’ve walked enough Bloomington homeowners through that process to know exactly which records the county asks for and how to sequence the glass work so you’re not stuck waiting on a permit correction while your shower sits torn apart. A contractor from a neighboring city might not even flag the issue until the inspector shows up. We flag it at the first visit, because that’s the difference between a smooth sign-off and a stalled job.
Mr-Glass Models & Products We Service in Bloomington
We work on the full Mr-Glass shower line: the Frameless Glass Shower Enclosure, Semi-Frameless Sliding Shower Door, Neo-Angle Corner Shower Enclosure, and the Tub-to-Shower Glass Conversion Kit. When the panel geometry is sound, we fit OEM Mr-Glass hinges, handles, sweeps, and seals. When the original hardware is the weak point, which happens often on Bloomington’s older semi-frameless doors, we spec heavy aftermarket stainless hinges and magnetic seals instead. We keep common seal profiles, sweeps, and hinge sets stocked for fast Bloomington turnaround, and when a panel is etched or chipped at a hinge hole, we’ll tell you plainly that a new panel set is the sounder money than chasing a repair. The right material in the right place, that’s where the job starts.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Bloomington
What you’ll pay depends on whether we’re swapping hardware, rebuilding a pan and curb, or tearing out a failed tub-to-shower conversion and setting a new frameless enclosure. Here’s what we quote across Bloomington right now:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free and itemized, and we don’t change the number once work starts unless the wall cavity reveals something nobody could have seen, which we document and walk you through before touching it. Call (855) 702-1622 for a written line-item quote.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Bloomington
Yes, if the replacement is part of a remodel or involves moving plumbing, changing the pan, or altering the shower footprint. A straight glass-for-glass swap on an existing pan may not trigger a permit, but Bloomington’s county path through Land Use Services means any bathroom remodel tied to the enclosure will. Call (855) 702-1622 and we’ll tell you before you start whether your job needs the county involved, and we’ll pull the permit if it does.
Usually repair, if we catch it early. A sagging panel is typically worn rollers or a stretched bottom hinge. We’ll set the panel, square the jamb, and fit fresh OEM or aftermarket stainless hardware. If the sag has been ignored long enough that the glass has chipped at a hinge hole or the frame is racked, a full replacement is the honest call. We’ll show you the panel and explain which way the math points before you decide.
Because Bloomington’s summer heat and UV bake the factory sweep seal and corner silicone until they shrink and pull away from the glass. Water then weeps onto the curb and through any gap in the tile joint. The fix is a fresh sweep and a proper silicone bead, but we always check the curb and framing under the tile before declaring it a simple seal job. Call (855) 702-1622 and we’ll tell you what you’re actually dealing with.
Yes, and we do it often in Bloomington, but those openings are seldom square. A pre-cut Mr-Glass enclosure will rack in a crooked opening, so we measure, shim, and sometimes square the opening first. That’s the part most contractors skip, and it’s why so many enclosures in converted bathrooms chip at the hinge holes within a year. We do the prep right the first time.
The best defense is a proper sealant coat and consistent wiping. Bloomington’s water is hard enough to etch glass over a few seasons, so quarterly application of a good glass protectant matters more here than it would in a softer-water city. If the glass is already etched, no cleaner will bring it back, and we’ll tell you whether replacement is worth it. Call (855) 702-1622 and we’ll give you a straight read.
Service Areas Near Bloomington
We run Mr-Glass service across Bloomington and the surrounding Inland Empire. You’ll also find us working in Bloomington service area neighborhoods along Valley Boulevard, and our crews regularly take Mr-Glass jobs in Mr-Glass sales & service territory that stretches toward Mr-Glass service in San Bernardino and Mr-Glass service in Tustin.
Book Your Mr-Glass Service in Bloomington Today
Call (855) 702-1622 for a free, written estimate on any Mr-Glass shower enclosure in Bloomington. We’ll measure, quote, and if you’re ready, get the glass ordered the same week. Gil and the team at Pinecrest Contractors handle every step, from the county paperwork to the final seal.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Bloomington and the Inland Empire.