Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Running Springs, CA | Pinecrest Contractors
We’re Pinecrest Contractors, and we install and service Kohler fixtures in Running Springs full time. The short version: we’re an independent general contractor, not a Kohler-authorized shop, but we’ve been setting Kohler tubs, valves, and toilets in mountain cabins long enough to know which ones hold up at 6,000 feet and which ones don’t. Running Springs homes, especially the older pier-and-post cabins, punish bathroom fixtures in ways a flatland tract house never will, so Kohler work here has to start with the subfloor, not the showroom. Call (855) 702-1622 if you’re planning a Kohler bath remodel or fighting a failing fixture in the 92382 area.

Why Running Springs Residents Choose Us for Kohler Service
Most crews can unbox a Kohler tub. Few can tell you whether a Bellwether cast iron model belongs on your specific Running Springs subfloor, or whether a Purist valve will survive a hard shutdown in January. We’ve worked on cabins from the 1930s through the 1970s, the A-frames and second homes that define this town’s housing stock. That matters when you’re setting hundreds of pounds of cast iron on framing that may have settled an inch since Nixon was in office.
Gil Rourke owns Pinecrest, and he grew up off Murrieta Hot Springs Road before that stretch turned into suburb. His older brother was a framer, which is how he got pulled into construction at seventeen. We still run jobs the same way he learned them: measure the floor before you trust it, use the right part, and don’t sell a homeowner a replacement when the original just needs a cartridge. We use genuine Kohler OEM cartridges, trip levers, and flush valves where the part is still produced, and we tell you honestly when a cracked tub isn’t worth refinishing.
Styles & brands we work with







Common Kohler Construction Problems We Solve in Running Springs
- Cracked cast iron tubs at the drain shoe. The Kohler Bellwether is a great tub for a slab foundation. On a Running Springs pier-and-post cabin floor that’s racked over time, the cast iron flexes and cracks right where the drain shoe threads in. We’ve pulled more than one of these from mid-century A-frames off Highway 330.
- Freeze-thaw toilet and lavatory cracks. Kohler vitreous china is tough but not indefinite. When a second home in Running Springs sits unheated through a mountain winter, water inside the trap and tank expands, and rims or tank bolt holes crack. We see this every spring when owners come back up the hill.
- Seized or weeping Kohler shower valves. Hard mountain well water plus seasonal shutoffs is hard on thermostatic and pressure-balance cartridges. A Kohler Purist or Artifacts valve that drips or won’t hold temperature usually needs an OEM cartridge, not a whole valve replacement.
- Chipped enameled sinks after ice damming. Kohler enameled cast iron and ceramic sinks chip at the drain and overflow when snowmelt backs water into older plumbing. The damage often shows up months after the freeze, once things thaw enough to inspect.
- Creaking, shifting tub surrounds. Running Springs lots are steep, and the same settlement that knocks a deck out of level will pull a tub surround away from the wall. Grout cracks, panels separate, and moisture finds its way in. We rebuild surrounds with freeze-rated materials so the repair holds through the next winter.
Kohler Service in Running Springs: What Local Conditions Mean for Your Equipment
Here’s the thing nobody tells you on a showroom floor in Redlands or Murrieta: a Kohler fixture is only as good as the floor it sits on. Running Springs housing stock is mostly mid-century mountain cabins, A-frames, and second homes dating from the 1930s through the 1970s. Many sit on pier-and-post foundations with no slab. Add steep lots, retaining walls, and real winter freeze-thaw cycles at roughly 6,000 feet, and you get floors that move. A Kohler Bellwether cast iron tub weighs over 300 pounds empty. Set that on a racked cabin floor and the enamel cracks, the drain shoe fails, or both. So when we do a Kohler bath remodel in Running Springs, fixture setting starts with shoring and re-leveling the subfloor, not with the tub. Flatland contractors don’t think about this because they’ve never had to. We think about it on every job. It’s true on Rim of the World Highway, it’s true off Highway 330, and it’s true in the steeper lots north of the lake.
Kohler Models & Products We Service in Running Springs
We work on the Kohler lines that actually end up in Running Springs homes. That includes the Kohler Bellwether cast iron alcove tub, the Memoirs and Devonshire toilet suites, Purist and Artifacts shower trim and valve systems, and the Forte and Coralais faucet lines we’ve pulled apart more times than we can count. When a part is still in production, we install genuine Kohler OEM cartridges, flush valves, and trip levers. When trim has been discontinued, we source quality aftermarket that matches the original finish. We keep common OEM cartridges and flush valves stocked for quick turnaround on Running Springs jobs, so you’re not waiting two weeks on a warehouse in Ontario while your shower drips. We also handle full Kohler sales & service across our service area, from single-fixture swaps to complete bath rebuilds.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Running Springs
Pricing depends on what you’re doing. A straight cartridge swap costs far less than a tub-to-shower conversion on a settled cabin floor. Here are the ranges we typically quote for Kohler-related bath work:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What changes the number in Running Springs is usually the subfloor. If we have to re-level framing or shore a pier before setting a tub, that’s real work and it shows up in the quote. Our estimates are free and line-itemed, so you’ll see exactly where the money goes. Call (855) 702-1622 and we’ll walk the job with you before we quote anything.

Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well, and we also handle Kohler service in Highland. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Running Springs
Yes, but it depends on the floor. Older Running Springs cabins on pier-and-post foundations often have subfloors that are out of level or flexing. A Kohler Bellwether cast iron tub needs a stable, leveled platform under it, so we may need to shore and re-level the framing before setting the tub. Call (855) 702-1622 for an honest read on your specific cabin.
Freeze-thaw cycles and hard mountain water are hard on Kohler valve cartridges. When a Running Springs cabin sits unheated between visits, seals and O-rings contract, mineral deposits collect, and the cartridge starts weeping or seizing when you turn the water back on. The fix is usually an OEM cartridge, not a whole new valve. Call (855) 702-1622 and we’ll identify it.
It often is, especially if the existing tub is cracking or the surround has failed. On a Running Springs A-frame or second home, a properly built walk-in shower with freeze-rated tile and a frameless glass panel can handle snowmelt and seasonal shutdowns better than a tub surround. We’ll walk you through the trade-offs. Call (855) 702-1622 for a design conversation and estimate.
Replace, in almost every case. A cracked vitreous china tank can fail suddenly and flood a cabin that sits empty. Running Springs freeze-thaw winters make the cracks worse over time. We install new Kohler Memoirs or Devonshire suites with proper winterization guidance. Call (855) 702-1622 and we’ll get it handled.
We do. Where the part is still in production, we use genuine Kohler OEM cartridges, trip levers, and flush valves. For discontinued trim, we source quality aftermarket that matches your finish. Call (855) 702-1622 with the model number if you have it, or we’ll identify it on site.
Service Areas Near Running Springs
We work across the San Bernardino Mountains and down into the valleys below. Our crews cover Running Springs, Running Springs service area, and surrounding mountain communities along the 330 and Rim of the World Highway corridors. We also serve the Inland Empire from Murrieta to Temecula, including Kohler service in Huntington Beach for coastal projects and Kohler service in Cathedral City for desert-side work. If you’re in the mountains or the valley, call and we’ll tell you straight whether we’re the right crew for your job.
Book Your Kohler Service in Running Springs Today
If you need Mentone Kohler service or Kohler work in Running Springs, call (855) 702-1622. We’ll schedule a walkthrough, give you a line-itemed estimate, and tell you honestly what needs fixing and what doesn’t. No pressure, no upsell. The right material in the right place – that’s where the job starts.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Running Springs and the San Bernardino Mountains.