Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Anaheim, CA | Pinecrest Contractors
We provide independent Dvele construction service across Anaheim, from module seam repair to full roof replacement and additions. Our crews have spent years setting, finishing, and repairing Dvele assemblies on Anaheim soil, and the difference comes down to this: we know what factory tolerances leave to the field. If you need an honest read on a Dvele module that’s acting up, call (855) 702-1622 for a free estimate.

Pinecrest Contractors is not a Dvele dealer and we’re not authorized by the manufacturer. That independence matters. We repair and build Dvele homes the way they actually behave once they sit on Anaheim lots, not the way a brochure describes them. Dvele sales & service work in this city demands a contractor who understands the gap between factory intent and field reality.
Why Anaheim Residents Choose Us for Dvele Service
Dvele builds panelized and volumetric modules in a factory, then hands the hard part to whoever shows up on site. The transport, the crane-set, the seam and flashing work: that’s field work, and it’s where most Dvele problems start. We’ve done enough of it in Anaheim to know what fails here and what holds. The right material in the right place, that’s where the job starts.
Gil Rourke, our owner, grew up around Southern California construction and spent years working every phase before Pinecrest became what it is. He still keeps a worn framing square from his first framing job in his truck. That’s the mindset our crews bring to Dvele work: look at the structure, find what’s wrong, fix it without inventing problems.
We’re a full-scope general contractor, which means we don’t hand you a list of vendors when a Dvele module needs coordinating with site-built work. One contract, one point of accountability, from the roof down to the pavers. For Anaheim homeowners with Dvele homes, that coordination is the whole game.
Styles & brands we work with







Common Dvele Construction Problems We Solve in Anaheim
- Module-to-module seam and flashing failure. Dvele joints depend on field gasketing and sealant. Anaheim’s thermal cycling, hot Santa Ana days followed by cool coastal nights, works those seams open faster than on a stick-built wall. We re-gasket, re-flash, and test until the joint stays dry.
- Ember intrusion at the roof-line and soffit transitions. Dvele’s lightweight modular roof decks and vent penetrations need ember-resistant detailing on Anaheim Hills hillside lots facing fall Santa Ana wind events. We install ember-resistant vent collars and re-detail transitions that factory specs don’t always address.
- Settlement and racking at the set points. Dvele modules transfer load to cribbing and shims. On shallow slab or pier-and-beam flat-lot lots around 92805, the shim stacks compress over time, showing as drywall cracks at module corners. We re-level and re-shim before the racking becomes structural.
- Condensation and wet-core leaks at factory plumbing chases. Where modular bath and kitchen pods meet site plumbing, the interface is a weak point. Anaheim’s UV-driven caulk failure on stucco and panel exteriors accelerates the problem. We open the chase, trace the leak, and seal it correctly.
- Crane staging and set coordination. Getting a Dvele module onto an Anaheim lot isn’t always straightforward. Narrow 1940s and 1960s tract lots around 92801 and 92805 often can’t fit crane setup inside the property line. We handle street-use permits and staging plans before the truck even rolls.
Dvele Service in Anaheim: What Local Conditions Mean for Your Equipment
Dvele modules craned onto Anaheim lots need a rigging and staging plan that many central Anaheim parcels can’t accommodate without a street-use permit. The narrow 1940s – 1960s tract lots around 92801 and 92805 often can’t fit a crane setup inside the property line, and near the Disneyland Resort corridor that means extra plan-check scrutiny over sightlines and staging before a single module lands. We’ve watched this slow down projects that other contractors thought would be a two-day set.
Anaheim construction is shaped by a building stock split: pre-1960 tract homes around the 92804/92805 core, and master-planned, HOA-governed development in Anaheim Hills and the Platinum Triangle. Add Disneyland-adjacent permitting and tourism-season scheduling, and you’ve got older-home retrofits, strict HOA architectural review, and guests’ expectations of noise-free holiday weeks all on the same job site. A Dvele module set in Anaheim Hills faces different set point, ember, and HOA constraints than one on a flat lot near 92805. We plan for that before we quote.
Dvele Models & Products We Service in Anaheim
We work on the full Dvele platform: site-set modular single-family homes, both panelized and volumetric modules; rooftop-ready and solar-prepped modular chassis; Dvele ADU and accessory dwelling units; and prefabricated kitchen and bath wet-core modules. For structural and weather-tightness interfaces, we source Dvele OEM seam gaskets, flashing kits, and connection hardware wherever the factory still stocks them. Those are not the places to improvise. For cladding, trim, and interior finishes, we use quality aftermarket equivalents that match or exceed the original. If you’re in Anaheim service area coverage and own a Dvele home, we can tell you what your module needs before we touch it.
On water intrusion and seam failures, we repair and re-flash rather than overbuild. Replacement only makes sense when the module deck or wet-core chase itself is compromised. We’re not here to sell you a new roof if a seam gasket and flashing kit will do.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Anaheim
What drives cost on Dvele work in Anaheim is access, scope of the failure, and whether OEM parts are still available. A roof repair on an Anaheim Hills module will run differently than one on a flat lot off 92805. Here’s where our pricing lands:
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Home Addition | $45000 – $130000 |
| Full Bathroom Remodeling | $9000 – $28000 |
Every estimate includes a written line-item breakdown. No change orders that weren’t discussed first. Call (855) 702-1622 for a free estimate and we’ll walk your Dvele home in Anaheim, roof line to set points.
Serving Anaheim, CA — Our Local Coverage Area
We’re based in the Anaheim area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Anaheim
Yes. We’re an independent contractor, not manufacturer-affiliated or authorized, so we can service Dvele assemblies without being bound by factory dealer constraints. Structural interfaces get OEM parts where the factory still supplies them; finishes get quality aftermarket equivalents. Call (855) 702-1622 for a free estimate and we’ll tell you exactly which approach applies to your repair.
Dvele roof leaks at the seams almost always trace back to field gasketing and flashing that opened due to thermal cycling. Anaheim’s hot Santa Ana days followed by cool coastal nights are relentless on factory joints. We re-gasket and re-flash with OEM kits where available. Call (855) 702-1622 and we’ll inspect your seam before the next rain.
It can, with the right staging plan. Many central Anaheim parcels can’t fit a crane setup inside the property line, so we pull street-use permits and coordinate staging with the city. Near the Disneyland Resort corridor, that means plan-check scrutiny over sightlines and staging. We handle it from start to finish. Call (855) 702-1622 for a set feasibility walk-through.
Yes. We do home additions off Dvele modules, whether that’s a site-built extension tied into the module or an additional Dvele module set alongside. The key is a clean structural and weather-tightness transition at the seam. Call (855) 702-1622 and we’ll show you what the addition looks like against your existing module, in plain numbers.
They do. Hillside lots in Anaheim Hills face Santa Ana wind events that push embers into roof-line and soffit transitions. We re-detail those with ember-resistant vent collars and inspect flashings specifically for wind-driven intrusion. It’s not ornamental. Call (855) 702-1622 for an ember-readiness check on your Dvele roof.
Service Areas Near Anaheim
Beyond Anaheim, our crews handle Dvele work in Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village. If you own a Dvele home in the Inland Empire, we likely have a crew already familiar with your lot. We also run dedicated Dvele service in Upland and Dvele service in Garnet for clients on the east side of the region.
Book Your Dvele Service in Anaheim Today
If your Dvele roof is staining, your seams are opening, or you’re planning a module set on a tight Anaheim lot, call (855) 702-1622. We’ll walk the property, tell you what’s actually wrong, and give you a free line-item estimate. Same-week scheduling available for active leaks and set coordination.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Anaheim and the surrounding region.