Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Highland, CA | Pinecrest Contractors
If you own a home in Highland with Ameristar windows or patio doors, you’re likely dealing with one of three things: warped vinyl frames, fogged glass seals, or a sliding door that fights you every time you open it. We’re Pinecrest Contractors, an independent Ameristar service provider fixing these exact problems across Highland’s 92346 ZIP code. We are not affiliated with or authorized by the manufacturer, which means no dealer markup and no script to upsell you into products you don’t need. Call (855) 702-1622 for a straight read on whether to repair or replace.

Why Highland Residents Choose Us for Ameristar Service
Ameristar windows and doors show up all over Highland, from mid-century tract homes on the valley floor to larger custom builds up against the foothills. Our crew has worked on enough of them to know which series fail in which ways, and which repairs actually hold up under Santa Ana wind cycles. Gil Rourke, our owner, grew up off Murrieta Hot Springs Road and cut his teeth on construction technology at Palomar College before running full-scope residential builds, including Ameristar repair in Muscoy. That background means we don’t just swap parts; we look at how the whole opening is performing. An Ameristar sash that sticks in August heat is rarely just a sash problem. It’s usually a frame alignment issue that started months earlier.
We stock OEM Ameristar replacement parts, including sash, rollers, weatherstripping, and sealed glass units, so a repair visit to a Highland home doesn’t turn into a two-week wait. For discontinued profiles, we source quality aftermarket equivalents that match the original dimensions and finish. The right material in the right place, that’s where the job starts.
Styles & brands we work with







Common Ameristar Construction Problems We Solve in Highland
Here’s what we see most often on Ameristar products in Highland, and why the local climate makes each one worse.
- Warped vinyl frames at mitered corners: Highland’s summers push triple digits, and Santa Ana winds add dry, superheated air from the east. Ameristar vinyl frames, especially the builder-grade double-hung series common in 1980s and 1990s tract homes, expand and contract until the miter welds lose their grip. You’ll notice air whistling through the corner or water staining on interior drywall after wind-driven rain. We re-secure or replace the sash, and when the frame itself is compromised, we tell you outright.
- Sliding patio door rollers that flatten and tracks that pit: Brushfire-season winds carry fine grit and ash from the foothills into Highland neighborhoods. That dust settles in Ameristar door tracks, grinds against the rollers, and flattens them over time. The door gets stiff, then nearly impossible to move. We rebuild the roller assembly and clean or replace pitted track sections so the door slides and latches properly.
- Fogged glass on south- and west-facing Ameristar windows: Sealed glass units on the sun-blasted sides of Highland homes fail faster than anywhere else in the Inland Empire. Years of intense UV exposure break down the internal seal, and condensation clouds the view permanently. We replace the insulated glass unit, not the whole frame, whenever the frame is still sound.
- Cracked and pulled-away weatherstripping and door sweeps: Ameristar door sweeps and weatherstripping dry out, crack, and peel back from the frame under Highland’s heat. On foothill homes where wildfire-hardening codes require ember-resistant assemblies, a gap in a door sweep isn’t just an energy leak, it’s an ember entry point. We replace sweeps and weatherstripping with materials that hold their shape through heat cycles.
- Single-hung sash springs that lose tension: The constant thermal cycling in Highland causes Ameristar sash spring mechanisms to fatigue. Windows won’t stay open, or they slam shut. We replace the spring assembly with OEM parts and adjust the sash for proper balance.
Ameristar Service in Highland: What Local Conditions Mean for Your Equipment
Highland sits at the base of the San Bernardino Mountains on the east side of the San Bernardino Valley, and that geography shapes every Ameristar repair we do. The foothill edges near the San Bernardino National Forest carry wildfire-hardening expectations that flatland cities like Ameristar in Redlands and Rialto simply do not face. When a homeowner off Boulder Avenue needs an Ameristar window replaced, the conversation isn’t just about glass clarity; it’s about whether the unit meets the defensible-space requirements for that hillside lot. We routinely specify tempered, low-E glazing and ember-resistant venting on replacements that would have been standard builder-grade units twenty years ago. A window that seals against wind-driven embers is a different product than one that merely keeps out the afternoon heat. That distinction is the whole job in this part of Highland.
Ameristar Models & Products We Service in Highland
We service the full range of Ameristar residential products found across Highland’s housing stock. That includes the Ameristar by Ply Gem double-hung vinyl windows that went into so many 1980s and 2000s tract homes, single-hung vinyl windows with low-E glass, vinyl picture and awning window combinations, and sliding patio doors with tempered glass. Our parts approach is simple: if the frame and hardware are still sound, we repair with OEM Ameristar components or tightly matched aftermarket equivalents for discontinued profiles. If frame warping is widespread or glass-seal failure has hit multiple units on the same elevation, we tell you honestly that replacement beats another round of repairs. We’re also a full-scope general contractor, which means when that window replacement turns into a siding, roofing, or structural-hardening discussion, we handle it under one contract. Our Ameristar sales & service experience runs deep because we’ve been inside these openings on hundreds of Inland Empire homes.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Highland
What you pay depends on scope. A single fogged-glass replacement is a very different number than replacing every window on a south-facing elevation before wildfire season. Here’s what we quote for the Ameristar-related work Highland homeowners ask about most.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Your free estimate includes a full inspection of the affected windows or doors, an honest read on repair versus replace, and a written line-item quote with no change orders hiding in the wings. Call (855) 702-1622 to get one scheduled.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Highland
If the frame is still square and the sash operates properly, we replace only the sealed glass unit, which is about a third the cost of a full window replacement. Fogging means the internal seal has failed, not the frame. But if multiple units on the same wall have failed or frames show warping, replacement starts making more sense. Call (855) 702-1622 and we’ll give you a straight answer based on what we find.
Older Ameristar units are not, but replacements can be. Foothill homes near the San Bernardino National Forest fall under defensible-space and ember-resistant construction expectations, which means new glazing should be tempered and venting should resist ember intrusion. We specify those upgrades on every foothill job. Standard builder-grade units from the 1990s won’t meet current fire-safety expectations.
Santa Ana winds carry fine grit that pits door tracks and grinds down rollers, plus sustained wind pressure that flexes the door slab and loosens weatherstripping. The result is a door that’s hard to slide, doesn’t latch cleanly, and leaks air. We rebuild the roller assembly and replace sweeps and weatherstripping so the door seats tightly again.
Usually yes. We carry or can source OEM Ameristar sash and frame components for the Ply Gem series, and for discontinued profiles we work with aftermarket manufacturers that replicate the original extrusion shapes. Whatever we install gets matched to your existing grid pattern and finish.
We do. Hillside homes in Highland need window installations that account for shear and movement, especially on steeper lots near the foothills, similar to Ameristar service in Loma Linda. The opening gets braced and anchored to the surrounding framing so the window doesn’t become a failure point during a seismic event. That’s standard practice on our Highland jobs.
Service Areas Near Highland
We serve Highland and the surrounding communities from our Inland Empire base. That includes Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village. If you’re in Santa Ana or Orange, see our dedicated pages: Ameristar service in Santa Ana and Ameristar service in Orange. For the full picture of where we work around here, visit our Highland service area page.
Book Your Ameristar Service in Highland Today
Fogged glass, a patio door that won’t slide, or frames that whistle in a Santa Ana wind, whatever you’re dealing with, we’ll diagnose it straight and quote you a fair number. Call (855) 702-1622 to schedule your free estimate in Highland.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Highland and the surrounding region.