Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Banning, CA | Pinecrest Contractors
We install and repair Tremron pavers, retaining walls, and caps throughout Banning, 92220, as our General Contractor in Banning. What separates our Tremron work here is simple: we build for the San Gorgonio Pass wind corridor, which means deeper polymeric sand joints and heavier edge restraint than a calm inland city would ever need. Call (855) 702-1622 for a free estimate on paver patios, driveways, or retaining wall work.

Pinecrest Contractors has run Tremron products across the Banning service area for years. We know the line’s tolerances, its jointing requirements, and how its units behave when the pass wind hits them every afternoon. Our Tremron sales & service experience covers the full product family, from Highland wall block to Mega Olde Towne pavers.
Why Banning Residents Choose Us for Tremron Service
We’re harder on edge restraint and joint fill than most installers, because Banning demands it. Gil Rourke, our owner, grew up off Murrieta Hot Springs Road and has spent his whole career working the inland passes and valleys. He learned early that the right material in the wrong place fails twice as fast. The right material in the right place – that’s where the job starts.
Our crews work directly with Tremron units day in and day out. That matters when a homeowner off Ramsey Street needs a section of patio matched to courses laid five years ago, or when a new driveway has to hold its lines against sustained gusts. We are not authorized, sponsored, or endorsed by Tremron. We’re an independent general contractor whose familiarity with the line comes from installation volume, not a manufacturer badge.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Banning
- Polymeric sand joint loss from wind scour. The pass wind runs across open paver fields and strips shallow-filled joints within a season. We pull failed sand, clean joints to full depth, and refill with a properly activated polymeric sand spec’d for continuous wind exposure.
- Efflorescence and salt bloom on paver surfaces. Banning’s dry inland heat pulls moisture up through the paver body, and when the base below doesn’t drain, white mineral deposits bloom on the surface. We correct the drainage path, clean the affected units, and repair the base so the moisture stops migrating through the pavers.
- Edge creep and joint separation on paver driveways. Undersized plastic edging flexes under thermal cycling and sustained gusts, letting outer courses wander outward. We re-set the field and anchor it with heavier edge restraint, often concrete haunching on the exposed windward side.
- Retaining wall block settlement or lean. Banning’s sandy, expansive soils shift, and walls built without geogrid or proper base compaction begin to lean within the first few winters. We dismantle the affected section, recompact, add grid where the wall height demands it, and re-lay the Tremron Highland block with proper batter.
- Heaved or spalled sections that need replacement matching. When Banning’s winter cold snaps and summer heat cycle through older paver fields, some units spall or lift. We source genuine Tremron units and matching caps so repairs blend with the surrounding courses instead of reading as a patch.
Tremron Service in Banning: What Local Conditions Mean for Your Equipment
The San Gorgonio Pass funnels some of the strongest, most persistent winds in Southern California straight through Banning. For paver and wall work, that single fact changes the construction spec. Joints scoured by wind-driven sand don’t just look worn; the sand loss lets units shift, and once units shift, the interlock that makes a paver system structural starts to fail. We see it regularly in the neighborhoods near the historic downtown and along the open parcels off the I-10 corridor where wind has a clean run. Calm inland neighbors like Beaumont or communities needing Tremron repair in Yucaipa don’t deal with this to anywhere near the same degree. Polymeric sand, edge restraint, and base compaction all get spec’d differently on a Banning job than they would fifteen minutes west. Our crews add depth to joint fill, upgrade edge anchoring, and when the windward side of a patio faces the pass with no windbreak, we’ll recommend a heavier cap or a design that shortens the exposed run. That’s not overbuilding; it’s reading the site.
On a paver patio job off the historic downtown grid, our crew found the prior installer had skimped on edge restraint and polymeric sand, and the pass wind had scoured the joints and shifted outer courses. We re-set the Tremron units on a recompacted, properly drained base, added a heavier anchored edge, and filled joints full-depth with polymeric sand. The patio has held its lines through two windy seasons since.
Tremron Models & Products We Service in Banning
We work with the full Tremron line: Oldcastle Marquee Series pavers, Mega Olde Towne pavers, Highland retaining wall block, and the patio and wall caps that finish those systems. When a repair needs to blend with existing courses, we source genuine Tremron units and matching caps and edge restraints. For base aggregate and polymeric sand, we use quality aftermarket products spec’d for performance in Banning’s wind and thermal cycling, not brand loyalty. If more than roughly a third of a field is heaved or spalled, we tell owners to re-lay or replace rather than chase spot repairs that will keep failing.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Banning
These are the ranges we see most often for Tremron work across Banning:
| Service | Typical Cost Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
Your final number depends on square footage, how much base work is needed, whether we’re matching existing Tremron units, and how exposed the site is to pass wind. A free estimate from us includes a walk of the site, drainage check, and a written line-item quote. Call (855) 702-1622 and we’ll come take a look.
Serving Banning, CA — Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Banning
Yes, when the joints and edges are built to a calm-city spec. Wind-driven sand scours shallow polymeric sand out of joints within a season or two, and once sand is gone, units shift and lose interlock. A patio built with full-depth joint fill and heavier edge anchoring holds up fine. Call (855) 702-1622 and we’ll assess what your existing patio needs.
Yes. We source genuine Tremron units, caps, and edge restraints so a repair blends with what’s already there. Color match on older units isn’t always perfect, since sun and weather age the surface over years, but we get it close enough that the repair doesn’t announce itself.
We compact a thicker base than the inland standard, then anchor the perimeter with heavier edge restraint, usually concrete haunching on the windward side. Joints get filled full-depth with a polymeric sand spec’d to stay put under continuous wind. The goal is a field that doesn’t creep outward or lose sand.
Efflorescence happens when water moves through the paver body and brings dissolved minerals to the surface, where the dry heat evaporates the water and leaves white deposit behind. It’s not a product defect; it’s a moisture and drainage signal, and the fix is correcting the base so water stops migrating upward. Call (855) 702-1622 for an exact read on your pavers.
If more than roughly a third of the wall shows settlement, lean, or broken block, replacement is usually the cheaper long-term answer. Spot repair works when the damage is contained to a short section and the base under the rest of the wall is still solid. We’ll tell you honestly which side of that line your wall falls on.
Service Areas Near Banning
We run Tremron work throughout the San Gorgonio Pass and the valleys below it. That includes Tremron service in Calimesa to the west, where the wind still runs but the terrain shifts, and Tremron service in Norco down toward the Riverside side. We also cover the Murrieta, Temecula, and Wildomar areas regularly.
Book Your Tremron Service in Banning Today
Wind, dust, and dry heat don’t wait. If your Tremron patio, driveway, or wall is showing joint loss, edge creep, or settlement, call (855) 702-1622 for a free estimate, including Tremron service in Valle Vista and surrounding Pass communities. We’ll walk the site, give you a written quote, and build it to hold through Banning’s worst gusts.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Banning and the San Gorgonio Pass.