Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Placentia, CA | Pinecrest Contractors
We’re Pinecrest Contractors, an independent contractor serving Placentia homeowners with Mr-Glass premium glass shower enclosures, walk-in conversions, and full bathroom remodels. The short version: we measure, fabricate, and install frameless and sliding Mr-Glass units in Placentia’s older ranch homes and newer infill townhomes, and we’ll tell you straight whether that sagging door needs a $40 roller set or a full re-cut glass panel. Call (855) 702-1622 for a free estimate.
Because we’re not Mr-Glass factory service, we don’t have a quota to sell you a whole new enclosure when a genuine hinge, roller, or seal kit fixes the problem. Gil Rourke, our owner, has spent decades on job sites across Orange County, and he built this company around one idea: the right material in the right place, that’s where the job starts. For Placentia homeowners with 1950s bathrooms that haven’t been plumb in thirty years, that means measuring twice, opening the wall when we have to, and cutting glass to the actual opening, not the blueprint spec. For a deeper look at how we approach all Mr-Glass work, see our Mr-Glass sales & service page.
Why Placentia Residents Choose Us for Mr-Glass Service
Placentia’s housing stock runs in two directions. The older neighborhoods off Yorba Linda Boulevard and Kraemer still hold hundreds of single-story stucco ranches from the Eisenhower and Kennedy years, most with original bathrooms that have been re-tiled at least once and floors that have settled a quarter inch out of level. We also provide Mr-Glass repair in Yorba Linda for similar homes in that area. The newer infill townhomes along Orangethorpe and Kraemer corridors are tighter and cleaner, but slab movement and hard water show up there too. We work both ends of that spectrum every week.
We keep genuine Mr-Glass hardware on the truck: hinges, rollers, handles, magnetic seals, and both 3/8-inch and 1/2-inch door sweeps. When your glass is sound, that’s usually all you need. When the glass is chipped, the cutout is misdrilled, or the opening got re-tiled to a new dimension, we say so and order a custom replacement panel. That honesty comes from Gil’s years working every phase of residential construction across the Temecula Valley before we expanded into Placentia. He learned to spot the difference between a repairable door and a lost cause, and he teaches every tech we hire to see it the same way. For the full picture of where we work, check the Placentia service area page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Placentia
- Seized rollers and dragging doors from hard water. Placentia’s municipal water is tough on sliding frameless doors. Mineral scale builds on the bottom track and rollers until the door hangs or drags. We pull the old rollers, clean or replace the track, and install fresh genuine Mr-Glass roller assemblies so the door glides again.
- Hinge sag on heavy 3/8- and 1/2-inch doors. The hot, dry Santa Ana season causes slabs under Placentia’s older ranches and newer townhomes to expand and contract. Walls move, openings drift, and a heavy framed panel starts swinging out of square. We re-true the wall-to-glass plumb and reset the hinges before the glass edge starts chipping.
- Leaking curbs from UV-baked sweeps and seals. West-facing bathrooms in Placentia take direct afternoon sun. Vinyl water-stop sweeps and magnetic seals dry out, crack, and leak at the curb. Replacement kits are straightforward when the glass is good, and we keep the common Mr-Glass profiles stocked locally.
- Glass-edge chipping near hardware cutouts. Older tracked Mr-Glass units sometimes shipped with unpolished edges around the hinge and handle cutouts. Repeated door swings stress those edges until chips spread. Once the glass is compromised, the safest move is a re-cut panel, not a patch.
- Out-of-square openings after re-tiling. A lot of Placentia’s 1950s tub surrounds have been re-tiled at least once. Each new tile layer shifts the opening a little. When we measure for a Mr-Glass frameless enclosure, we check the walls for square before ordering glass, so you don’t get a panel that fits on paper and gaps in the corner.
Mr-Glass Service in Placentia: What Local Conditions Mean for Your Equipment
Here’s the thing about Placentia that doesn’t show up in a generic service listing. Most of the homes north of Chapman Avenue were built in tracts during the 1950s and 1960s, and their bathrooms were framed for a standard 30- to 32-inch tub alcove. Those original alcoves were never dead-square even when the studs were new, and after sixty-plus years of seasonal slab movement and two or three rounds of re-tiling, they’re often off by a half inch or more. A frameless Mr-Glass enclosure cut to nominal dimensions won’t fit that opening properly, and no amount of silicone will fix a half-inch gap at the curb. That’s why we open the wall to true-up the studs and verify the shower framing is plumb before we ever order glass. In newer townhomes off Orangethorpe, the issue is different: tight layouts and shared walls mean we’re often working in a 36-inch alcove where the Mr-Glass sliding panel needs trimmed rollers to clear the adjacent vanity. You can’t just drop in a kit and walk away.
The drain side matters too. Placentia’s original cast-iron drains and galvanized supply lines are still in service in a surprising number of these older bathrooms. We check what’s behind the wall while we’re in there. If the pan needs resetting or the supply lines are ready to let go, it’s cheaper to fix that during the glass install than to tear out a new shower a year later. On a 1950s ranch near downtown Placentia, off Kraemer, we replaced a sagging Mr-Glass sliding frameless enclosure in a bath where the original tub surround had been re-tiled to a slightly out-of-square opening. Our tech pulled the old track, shimmed and plumbed the studs, reset the pan, and installed a custom-cut Mr-Glass hinged frameless unit with new genuine hardware and polished edges. The homeowner got a leak-free curb and a door that swings clean through the Santa Ana season instead of dragging.
Mr-Glass Models & Products We Service in Placentia
We work on the full Mr-Glass line that shows up in Placentia homes. That includes the Mr-Glass Frameless Enclosure Series with custom cut-to-size hinged units, the Mr-Glass Sliding Frameless Shower Door with its rolling-roller track system, and the Mr-Glass Neo-Angle Frameless Enclosure for corner showers. We also handle custom pieces cut from their commercial glass line, including starphire and roll-alpha tempered glass, which we order for homeowners who want the cleanest possible clarity.
The parts rule we follow is simple. If the tempered pane is sound, we source genuine Mr-Glass hinges, rollers, handles, sweeps, and magnetic seals, because the glass is the expensive part and it usually outlasts the moving hardware. If the glass is chipped, the cutout is misdrilled, or the opening has been re-tiled to a new dimension, we recommend a custom re-cut enclosure. Trying to save an out-of-tolerance pane is false economy.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Placentia
Pricing depends on the scope. A straight roller and seal replacement on an existing Mr-Glass sliding door is a small job. A full walk-in shower conversion with new glass, pan, tile, and plumbing runs higher. Here are the ranges we quote for Placentia jobs:
| Service | Typical Price Range |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
What drives the number is whether we’re reusing existing glass, whether the studs need shimming, what the drain looks like once we open the wall, and whether you want standard tempered or low-iron starphire glass. Every estimate is free, written, and line-itemed. Call (855) 702-1622 and we’ll walk through your bathroom together.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Placentia
Yes, but not with a stock panel cut to nominal dimensions. We open the wall, true up the studs, check whether the shower framing is plumb, and then order glass cut to the actual opening. On Placentia’s older ranch homes, this is standard practice, not an upsell. Call (855) 702-1622 to get a measurement scheduled.
For most hard-water bathrooms in Placentia, we lean toward a hinged frameless panel over a sliding tracked unit. The reason is mechanical: hard water scale builds on bottom tracks and rollers until the door drags. A hinged panel has fewer moving parts and no track to collect minerals. If space requires a slider, we recommend a regular roller-cleaning schedule and a squeegee. For an exact recommendation, call (855) 702-1622.
Repair when the tempered glass is sound and the problem is in the moving hardware: rollers, hinges, seals, or handles. Replacement is the better call when the glass is chipped near cutouts, the original cut is out of tolerance, or the opening has shifted so far that shimming won’t close the gap. We’ll show you both options and the cost difference before you decide.
Yes. We’re a full-scope general contractor, not a glass-only shop. When a Mr-Glass install in Placentia requires opening a wall to re-plumb supply lines, reset a cast-iron drain, or re-tile a shower surround, our crew handles it under one contract and one schedule. That means no finger-pointing between a glass vendor and a tile sub if a leak shows up later.
It depends on scope. Swapping a glass panel in the same footprint with no plumbing changes often requires no permit. Reconfiguring the shower, moving a drain, or adding a valve typically does. We pull whatever the City of Placentia requires and pass inspection before we sign off. Call (855) 702-1622 and tell us what you’re planning; we’ll let you know what the scope triggers.
Service Areas Near Placentia
Our crews work throughout the surrounding region. If you’re in Mr-Glass service in Fountain Valley, the same independent approach and genuine parts carry over. We also serve Mr-Glass service in Rancho Cucamonga, plus the Murrieta and Temecula Valley areas where Gil first built the company. If you’re in a neighboring Orange County city, call us and we’ll tell you straight whether we can get a crew to you this week.
Book Your Mr-Glass Service in Placentia Today
If your Mr-Glass door drags, leaks at the curb, or hangs out of square, don’t wait until the glass edge chips and the panel becomes scrap. Call Pinecrest Contractors at (855) 702-1622 for a free Placentia estimate. We’ll measure, give you an honest repair-versus-replace read, and schedule the work around Placentia’s heat and wind patterns so the job gets done right the first time.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Placentia and surrounding Orange County communities with independent Mr-Glass service and full-scope bathroom remodeling.