Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Jurupa Valley, CA | Pinecrest Contractors
We install and service Mr-Glass specialists shower enclosures, mirrors, and window glass across Jurupa Valley as an independent contractor. What makes our work here different is that we measure glass against the walls and openings this city actually hands us: dairy-era lots with settled foundations, ranch homes with out-of-square jambs, and new tract builds that haven’t finished moving yet. If you’ve got a Mr-Glass enclosure dragging, leaking, or clouded, call Pinecrest Contractors at (855) 702-1622 for a straight read on whether it needs re-hanging, new hardware, or full replacement.

We’ve been fitting and servicing the Mr-Glass line long enough to know which parts hold up in Jurupa Valley’s heat and which castings loosen first. Gil Rourke leads our team, and he learned framing and enclosure work back when the Temecula Valley was still more ranch than subdivision. The right material in the right place, that’s where the job starts.
Why Jurupa Valley Residents Choose Us for Mr-Glass Service
We’re an independent contractor, not a manufacturer-authorized shop, and that matters here. It means when we recommend genuine Mr-Glass hinges or a quality aftermarket roller, the call is based on what keeps your enclosure closing clean for another decade, not on what’s covered under a warranty program. We carry genuine Mr-Glass replacement hardware, sweeps, and seals so the original fit stays intact, and we use aftermarket hinges, rollers, and gaskets only when the OEM part has been discontinued.
Gil and our installers know the Pedley Mr-Glass service product line the way you know your own street. Frameless pivots, semi-frameless bypass sliders, custom mirror and closet glass, window and patio-door replacement. We’ve re-hung doors on mid-century ranches near the Santa Ana River bottom, and we’ve templated 1/2-inch fixed panels in new infill subdivisions off Limonite. Same brand, same care. Different walls.
Working with one team that handles the whole project, from measuring to final silicone, means you never get bounced between a glass vendor and a general contractor. We’re both. For any Mr-Glass sales & service question, we’ll show you the options without steering you toward a full replacement you don’t need.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Jurupa Valley
- Dragging doors and sagging pivots. Inland heat and daily use wear the cast fittings on semi-frameless Mr-Glass enclosures until doors drop and drag the sweep. We re-set pivots and hinges, replace worn sweeps, and send you home with a door that closes without a fight.
- Etched and clouded glass. Jurupa Valley’s hard water and wind-driven dust settle on south- and west-facing enclosures that bake all summer. Mineral scale etches tempered glass over time. We polish what can be saved and tell you honestly when replacement is the better call.
- Cracked fixed panels and mirrors. Santa Ana wind events and the thermal swings between a 105-degree afternoon and a 55-degree night stress glass that was shimmed against a settling wall. We replace the panel and correct the cause, not just the symptom.
- Leaks at the wall jamb. On older ranch and mobile homes in Jurupa Valley, out-of-square openings and past unpermitted framing shifts leave gaps at the gasket where the enclosure meets the wall. We scribe, shim, and re-seal to the real wall, not the square one.
- Failed sweeps and seals. Dust from graded lots and horse properties works into bottom sweeps and side gaskets faster here than in coastal cities. We stock replacements and swap them before water finds the subfloor.
Mr-Glass Service in Jurupa Valley: What Local Conditions Mean for Your Equipment
Jurupa Valley wasn’t built on tidy suburban lots. Before 2011, much of this area was unincorporated county land, and before that, dairy and agricultural ground. That history shows up in the walls. Lots that once held corrals, feed barns, or old fill often have foundations that settled unevenly decades before the first glass enclosure ever went in. When we measure a Mr-Glass shower or mirror package here, we’re not just checking whether the opening is square. We’re checking what it’s sitting on.
A frameless panel doesn’t fail because the glass is bad. It fails because the wall behind it crept a quarter-inch out of plumb since the dairy-era addition went on, and the original installer shimmed the gap instead of correcting the substrate. That’s the Jurupa Valley variable a standard tract-lot city never hands you. Off the 91752 side of town, on a horse-property lot, we worked on a 1970s ranch bath where the wall had moved just like that. Our tech scribed and shimmed a 3/8-inch Mr-Glass service in Sunnyslope frameless fixed panel to the real wall instead of the square one, then re-set the pivot with new OEM hinges and a fresh sweep. The enclosure closed without the drag that had been chipping the old door, and we left the homeowner the part numbers for the next hardware refresh.
Mr-Glass Models & Products We Service in Jurupa Valley
We work on the full Mr-Glass line that shows up in Jurupa Valley homes: frameless pivot shower doors and fixed panels in 3/8-inch and 1/2-inch tempered glass, semi-frameless sliding bypass enclosures, custom mirror and closet or wardrobe glass packages, and framed and frameless window and patio-door glass replacement. When glass is sound, we re-hang and re-seal rather than sell a whole new enclosure. When the panel is cracked, etched past saving, or the frame has pulled away, we say so plainly.
For Jurupa Valley turnaround, we keep genuine Mr-Glass hardware and common replacement sweeps and seals on hand. If the OEM part is discontinued, we’ll tell you exactly which aftermarket hinge, roller, or gasket we’re substituting and why it’s the right fit for your door.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Jurupa Valley
Every job starts with a free estimate at your home, where we measure the actual opening and look at what’s behind it. The numbers below reflect what we see across Jurupa Valley. What drives cost is glass thickness, hardware condition, and whether the wall itself needs correction before the panel goes in.
| Mr-Glass Service | Typical Jurupa Valley Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Call (855) 702-1622 for an exact quote on your Mr-Glass enclosure or window glass. Estimates are free, and we’ll give you a line-item number before any work starts.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re based in the Jurupa Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Jurupa Valley
Usually not. Dragging doors on Mr-Glass semi-frameless enclosures are almost always a hardware issue: worn pivot hinges, loose cast fittings, or a flattened sweep. We re-set the hardware and replace the sweep, and the door closes clean again. Call (855) 702-1622 and we’ll tell you if replacement is actually necessary.
The 91752 zip runs through Jurupa Valley’s former dairy and agricultural land, where old fill and buried site work mean foundations move more than on standard tract lots. Add inland heat, hard water, Santa Ana wind, and dust, and you get glass that’s stressed, etched, and chipped faster. The fix starts with measuring against the real wall, not the square one.
No. We install frameless Mr-Glass panels and pivots onto existing tile using drilled anchor points and proper waterproofing at the jamb. If the wall behind the tile has moved enough to compromise the seal, we’ll tell you before cutting anything.
Yes. We measure the actual opening, not the original rough numbers. On older ranch and manufactured homes in Jurupa Valley, that’s the difference between a panel that seals and one that leaks every winter rain. We’ll match the glass spec and order the correct replacement.
Heat and wind stress any glass over time, but a properly installed Mr-Glass in Eastvale enclosure with correct shimming and hardware will hold. We account for the thermal swings and Santa Ana winds that hit Jurupa Valley when we template and set your panels. Call (855) 702-1622 to schedule a free estimate.
Service Areas Near Jurupa Valley
Beyond Jurupa Valley, we work in nearby cities and neighborhoods including Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village. If you’re in a neighboring community, we bring the same Mr-Glass expertise. For our work along the 15 corridor, see Mr-Glass service in Cabazon. Closer to home, we handle Mr-Glass service in Glen Avon as well. For our full coverage area, visit Jurupa Valley service area.
Book Your Mr-Glass Service in Jurupa Valley Today
Whether it’s a dragging pivot, a cracked panel, or a full walk-in shower replacement, we’ll measure, quote, and install it right for your Jurupa Valley home. Call (855) 702-1622 to schedule your free estimate, and we’ll come out to look at what’s actually happening with your glass.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Jurupa Valley since the city incorporated.