Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Perris, CA | Pinecrest Contractors
We’re Pinecrest Contractors, an independent general contractor in Perris providing Mr-Glass window and glass door service across Perris, CA. We install, repair, and replace Mr-Glass windows, patio sliders, and glass units in tract homes and acreage properties throughout the 92570, 92571, 92572, and 92599 ZIP codes. What makes our Mr-Glass work different in Perris is simple: we understand how these specific units fail under sustained 100°F heat and Santa Ana wind, because we’ve been fixing them here for years. Call (855) 702-1622 for a free estimate.
Why Perris Residents Choose Us for Mr-Glass Service
We know the Mr-Glass catalog from the installation side, not from a brochure. Our crews have set and serviced Series 1000 single-hungs, Series 1500 horizontal sliders, fixed picture units, and patio sliding glass doors across Perris tract subdivisions and rural acreage. Gil Rourke, our owner, grew up off Murrieta Hot Springs Road and has spent decades on residential builds across the Temecula Valley; he learned early that a window doesn’t fail in a vacuum, it fails because of what the climate does to it. That’s the lens we bring to every Mr-Glass service in Romoland and every Mr-Glass job in Perris. We’re independent – not manufacturer-affiliated – which means we recommend the right fix for your situation, not what a factory program wants us to sell. From the roof down to the pavers, one contractor handles the whole scope, so your window or door replacement doesn’t turn into a finger-pointing exercise between trades. Call (855) 702-1622 to schedule a visit.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Perris
- Fogged glazing on south- and west-facing windows. Perris summer heat cycles stress the seal between panes. We see seal failure and fogging on Mr-Glass units in 1990s-to-2020s tract homes within a decade of original install. The fix is reglazing where the sash is sound; full replacement when it isn’t.
- Warped vinyl frames and hard-to-latch locks. Vinyl expands and contracts under sustained 100°F-plus sun exposure. Series 1000 and 1500 frames on Perris’s western exposures bow just enough that latches miss the strike plate. We often correct this with new sash hardware and realignment, but when the frame itself has twisted, replacement is the honest call.
- Wind-packed slider tracks and failed rollers. Santa Ana events funnel dust, grit, and fine debris straight through the Perris Valley and into patio door tracks. We clean out the packed material, inspect the rollers, and replace pitted or worn sets so the door glides instead of dragging.
- Weep hole clogging and sill water intrusion. Dry-season wind pushes debris into drainage channels on Mr-Glass sliders and hung units. When those channels plug, water backs up and finds its way into the sill and rough opening. This is a recurring issue in Perris’s dusty, windy weeks.
- Damaged glass from Santa Ana debris. Unsecured materials travel across freshly graded lots in the Perris Valley during major wind events. We’ve replaced more than a few storm-cracked fixed picture and awning units in the east 92571 subdivisions after a rough blow.
Mr-Glass Service in Perris: What Local Conditions Mean for Your Equipment
Here’s what makes Perris different from every neighboring city we work in. Perris is one of the fastest-growing cities in Riverside County, and the developable land on the east side was, much of it, former dairy and agricultural ground. That history matters when we’re working on window and glass installs in the 92571 subdivisions off the east side. When crews hit old manure-laden soils, abandoned irrigation lines, or buried dairy infrastructure during grading, it changes how a slab settles. A slab that settles unevenly puts stress on the rough opening, which puts stress on the window frame. We’ve seen Mr-Glass sliders in newer Perris tract homes bind at the latch because the frame got racked by a settling corner we traced back to a poorly compacted former corral or feed lot. If you’re adding windows to an existing Perris tract home or building on raw east-side ground, the soil story under your foundation is part of the glass conversation. Most builders don’t mention that. We do.
Mr-Glass Models & Products We Service in Perris
We service the Mr-Glass Series 1000 single-hung vinyl windows, Series 1500 horizontal sliders, vinyl patio sliding glass doors, and fixed picture and awning units. When frames are sound, we use OEM Mr-Glass sash, glazing, and hardware. When OEM parts are slow or discontinued, we source quality aftermarket balances, rollers, and weatherstripping that match the original build spec. We stock common Mr-Glass replacement parts locally for faster turnaround across Perris. If your project involves an addition – say, a new bedroom off a 2000s stucco tract home – we can match Mr-Glass window styles to existing units so the new work doesn’t look like an afterthought. This is part of our broader scope as a full general contractor; we’re not a specialty glass shop, so a window replacement can be coordinated with the siding, stucco patch, and interior trim in one pass. Explore our broader Mr-Glass sales & service page for more on how we approach these products.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Perris
Window and glass work in Perris runs a range depending on how many units, what condition the frames are in, and whether you need a like-for-like swap or something more involved. Here’s a straightforward look at what we quote across the valley:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (wind/storm-related) | $400 – $1,800 |
What drives the cost on a Perris Mr-Glass job? Number of units, glass package (single-pane retrofit vs. dual-pane or impact-rated), frame condition, and whether stucco repair is needed around the openings. A free estimate from us includes an on-site look at every window or door in scope, written line-item pricing, and an honest read on whether repair or replacement makes more sense. Call (855) 702-1622 for an exact quote – estimates are free.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well, and we also offer Mr-Glass service in Sun City. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Perris
Fogging happens when the glazing seal between the panes fails, which lets moisture in. In Perris, sustained 100°F-plus summer heat and intense UV stress those seals faster than in coastal climates, so we see fogged Mr-Glass units on tract homes within a decade of install. The fix is either reglazing the sash or replacing the unit, depending on frame condition. Call (855) 702-1622 and we’ll tell you which one you’re looking at.
Yes. We match Mr-Glass window styles and sizes to the existing units on the home so the addition blends with the original build. On Perris tract homes, that usually means matching Series 1000 single-hungs or 1500 sliders in the same finish and glass package. We’ll look at what’s on your house and spec the closest available match. Call (855) 702-1622 for a free estimate on the addition and windows together.
Usually it’s not the door itself. Santa Ana wind events blow grit and fine dust into the track, packing debris around the rollers and causing drag. We clean out the track, inspect the rollers for pitting, and replace worn sets. If the frame has racked due to settling, that’s a different story and we’ll tell you straight. Call (855) 702-1622 to have us take a look.
They can, especially on east-side acreage where Santa Ana winds throw debris across open land and where building codes may require wind-borne debris protection. Impact windows in Perris run $8,000 – $25,000 depending on unit count and size. We’ll show you the options across brands and glass packages, and help you weigh cost against the wind exposure on your specific lot. Call (855) 702-1622 for an exact quote.
We cut the stucco back cleanly around the rough opening, remove the old unit, set the new Mr-Glass window, and repair the stucco and trim to match. Because we’re a full-scope contractor, the stucco patch and interior trim work happen under the same crew and the same schedule – not handed off to a second trade. That keeps the wall looking original. Call (855) 702-1622 and we’ll walk you through exactly how we’d do it on your home.
Service Areas Near Perris
We serve Perris and the surrounding Riverside County communities, including Perris service area coverage across 92570, 92571, 92572, and 92599. Our crews also work in Mr-Glass service in Nuevo, Mr-Glass service in Mead Valley, Murrieta, Murrieta Hot Springs, Wildomar, Temecula, Sedco Hills, and Lakeland Village.
Book Your Mr-Glass Service in Perris Today
If your Mr-Glass windows are fogged, your sliders are dragging, or you’re planning an addition and need matched units, call (855) 702-1622. We’ll set a time to look at your place in Perris and give you a written quote with real numbers. One contractor, every system – and we’ll start with your glass.
Written by Gil Rourke, Owner at Pinecrest Contractors, serving Perris and the Temecula Valley with independent Mr-Glass service, Mr-Glass service in Good Hope, and full-scope residential construction.